To mark 40 years since we launched the ground breaking Willard Multi Function Conservation table, this month, we are showcasing the most popular variant, Option 5. This model has the essential features and reliability required for both paintings and textile conservation. It is highly suitable for all sizes of studio where paper and other flat media are also treated - this is a very practical and hard working variant option!
Sharing the same solid build quality, suction units, heating and control components as the other variants, option 5 comes without the built in climate control and circulation features. Accessories such as an acrylic hood, humidifier unit, carbon filter and companion table are all available as is a choice of fixed height and height adjustable versions in a range of sizes.
Application:
Large area bonding (lining)
Small area bonding and repairs
Reduction of distortion
Small area cleaning
Stain removal
Enhanced drying
Suction hydration
The equipment can be used as an enhanced version of a traditional, solid-top heated lining table by covering most of the work surface with a sheet of carbon impregnated rubber, or aluminium.
Multi-function table features:
Suction This is provided by a high volume, direct drive exhauster with an electronically regulated, variable speed motor. The digital display mounted on the control panel indicates the pressure difference in Millibar steps. A protective interlock prevents the motor being started up with the control dial set above its minimum setting.
Work surface heating Closely spaced rows of enclosed elements are situated directly below the perforated work surface along with the sensors. There is a temperature setting dial and a temperature readout on the control panel.
Edge heating This feature compensates for thermal loss at the perimeter of the table to ensure an even temperature of the entire work surface from centre to edge. The edge heater sensors are placed within the surround. The temperature setting dial is mounted on the control panel.
Safety Cut Out If the temperature dial is accidentally moved, or in the unlikely event of component failure, the temperature rises above a pre-set margin, the system will turn the power supply to the heating elements off.
A typical heating time should be approximately 20 minutes for a rise from 20°C (ambient) to 65°C with the heat evenly distributed across the whole perforated surface.
By-Pass Cooling When the by-pass cooling valve is opened, ambient air is drawn through the sub-surface ducting by the main suction motor. The air flow cools the work surface, ducting and heating elements and passes out through the exhaust port.
Optional Features
Carbon filter A replaceable activated carbon filter is built into the exhaust air system. The filtered exhaust can be vented into the room, or externally via a suitable hose connected to the exhaust outlet on the table. The filter cartridge is easily accessible for replacement purposes. A free-standing carbon filter is also available and can be fitted in-line at any time.
Height Adjustment This feature is proving increasingly popular as the benefit of ergonomically efficient equipment becomes more widely recognised. Health and Safety is also an important consideration, especially with a workforce of mixed height users. Systems are either hydraulic or electric depending on table size:
Continuous (stepless) height adjustment for accurate positioning of the work surface.
Fully synchronised movement of all legs
Very quiet action.
Good load capacity.
Usual range approximately200 mm (8 inches)
For more information and to discuss your exact requirements, please get in touch here where our experienced team will be on hand to help.
Comments