Suction cleaning and washing for conservation is a delicate operation which requires the best equipment to deliver optimum results. Not all conservation equipment is the same and our attention to detail and game-changing accessories can make studio life easier, and more efficient to give your projects optimum results. Take a look below at our renowned suction cleaning table and complementary lab sinks complete with a host of unique accessories.
Suction Cleaning & Washing Table
The Willard Suction Cleaning & Washing Table has a variety of uses making it a valuable addition to any conservation studio. Designed for controllable medium pressure, induced flow washing and rinsing where larger quantities of water are required, this table may also be used as a large sink unit for immersion and gravity flow washing.
An optional height adjustment feature allows optimum height to be achieved for each use. Find out more about our suction cleaning equipment here.
Our range of acrylic hoods unique to Willard offer more uses for the suction cleaning table. The hood is supplied as standard with an opening and cover to one side facilitating the easy insertion and removal of objects. An opening and cover can be fitted to both sides of larger hoods. These are free standing and are supplied with secured carrying handles, a pressure relief valve and vapour inlet. Find out more about our acrylic hoods here.
When suction is not required for cleaning projects, Willard washing laboratory sinks are a versatile addition to any studio or laboratory. Specifically designed to provide a flexible washing, draining and drying system suitable for most locations.
The washing tank is supplied with a geared tilting mechanism, which can be used during either the washing, draining or drying processes. The individually constructed stainless steel tank has a smooth double folded top lip for rigidity together with an extra thick rigid base of stainless steel to ensure strength and flatness.
The drainage point is generally located on either the centre line or to one side, at the hinged end of the tank. At the opposite end is a geared crank handle which enables the sink assembly to be gradually tilted up to approximately 4 inches (100mm) in height.
We are pleased to offer a host of optional features to customise your sink to your exacting requirements, take a look below at what we can offer.
Heating Lab Sink System - Consisting of an undersurface sensor controlled heating System primarily designed to maintain the temperature of pre-heated water, with thermostatic adjustable temperature setting.
Lab Sink Splash-backs - These stainless steel splash backs can be manufactured to compliment a sink installation within a fixed position and can be used to accommodate taps where required.
Service Pedestal - This can be supplied to fit adjacent to the sink and can be used to contain localised water treatment and filtration equipment, supplied with a stainless steel splash-back fitted to the top to facilitate the location of taps etc.
Lightweight Cover - A useful lightweight cover is available, which can either be a single or dual piece, this enables the sink double as a useful work space area when not in use.
Height adjustment - Willard tables can all be factory fitted with a manually operated smooth step-less hydraulic table height adjustment system, which enables the working height to be adjusted by up to 200mm. There is also an electrically operated option, where the crank handle is replaced with a powered up / down switch.
Shelf below sink mounted on to frame - we also offer sinks with integrated cabinets here.
Drying / draining rack fitted to shelf - This feature comprises of a perforated stainless steel shelf into which has been fitted adjustable vertical stainless steel supports’ this can be used for storage of washing trays and similar items. The drying rack can also be produced with shelves, or a combination of shelves and drying rack.
Comentários